The use, maintenance and cleaning of vacuum cleaners

1. To clean up the debris and various vacuum attachments in the barrel in time. The dust bag should be cleaned in time to check whether the perforation or air leakage. After cleaning the dust and dust bags with a cleaner and warm water, you must wait for it to be fully dried before it can be used. In addition, the air outlet/pipe/dust bag should be checked before and after use.

2. Check whether the power cord and plug are broken. After use, the power supply coil is wrapped into a tie on the top cover of the head.

3. When absorbing water, remove the dust bag first and then absorb water. In addition, water should be poured in time, and the water level should not exceed 2/3. After water absorption, the sewage in the barrel should be completely poured and kept dry. After the work is completed, check whether the inlet is blocked or miscellaneous. If any, clean it in time.

It should be noted that the water absorption function is only suitable for dry and humid vacuum cleaner, and the dry vacuum cleaner cannot absorb water.